Solder/Flux Combination

swif^®  95

Made in the USA

A 95/5 tin-antimony alloy solder combined with flux in a non-petrolatum based paste form for easy one-step, brush-on application. Fluxes, tins and solders in one operation. One pound does the work of 3 to 4 pounds of wire solder plus flux. Has identical melting point and plastic range as 95/5 wire, stick or bar solder including the same physical characteristics after soldering (Solidus, 450º F, liquidus 464 F, plastic (pasty) range, 14 F). Saves user application and prep time and eliminates wasted solder; no excess solder to drip if properly applied. Withstands working pressure 2.5 to 3 times greater than 50/50 tin-lead solder up to 250º F. Shear strength is 40% higher than 50/50. Contains no lead-recommended for soldering potable water lines. Recommended for food piping and processing where expansion and vibration may be encountered. Flux component is water-soluble. Includes free full-size metal handle horsehair brush with each container. Can also be used as an extremely effective tinning flux. No backup solder required for pipe under 1 1/2 inches. On larger sizes, backup can be done with any non-lead soft solder. UPC listed. Meets Spec. CID. A-A51145. Conforms to ASTM B-486.

Flux

climate smooth  soldering paste Made in the USA

Smooth, superior quality petrolatum based flux, especially formulated for use in extreme climate temperatures all year long. Unlike some paste fluxes which become semi-liquid when stored at high temperatures, and stiff at low temperatures, climate smooth will NOT lose its consistency. For use with all soft solders-including new, higher melting alloys. For sweat soldering most common metals except aluminum. Self-cleaning; lead-free formula. Chemically removes oxides on contact and prevents oxidation during heating. Meets Commercial Item Description A-A-51145 (supersedes Fed. Spec. O-F-506).   OSHA MSDS ANSI MSDS SPEC SHEET MSDS #4 MSDS #390  Spec Sheet

Preparation Products

open mesh abrasive cloth

Made in the USA

For cleaning and preparing copper pipe and fittings for soldering. Can be used in wet environments, and is easily cleaned with water for continual use. Made with resin-bonded 180-grit aluminum oxide for a sharper cutting face. Both sides are equally effective in cleaning pipe. Non-clogging. Long lasting. Packaged in a dispensing box. 

grit roll™
For cleaning, polishing, and deburring copper pipe and fittings. Made with water-resistant resin-bonded aluminum oxide (120 grit size). Packaged in a dispensing box. 

fitting brushes

Made in the USA

Industrial grade brushes feature abundant high-quality, long-lasting stainless steel bristles, assuring maximum performance and life. Available with wire or plastic handles.

tube cleaning brush

Made in the USA

Cleans the outside of tubing when preparing to solder. High quality, stainless steel bristles.

Prod. No.

Size

Pack

Note

Bar Code

50400

5 3/4"

144

-

032628504004