Paste

grrip®  and grrip®  lite
An all-purpose, tough, pliable, non-petroleum based seal for joints, valves, flanges, and gaskets - puts joints into service in minutes. Brushable; non-separating; will not run or drip from joints. Sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. For use on metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel; and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Apply to pumps, tanks and equipment carrying steam, water, oil, gasoline, fuel oil, hydraulic fluids, natural and LP gas (vapor state), other gases (except oxygen), liquids and chemicals (see spec sheet for details). Can easily be cleaned from tools and hands with isopropyl alcohol or Hercules for Hands towels. Performs over a temperature range of -50º to 400º F (on steel pipe), 12,000 psi (hydraulic), 2600 psi (gas). Certified to ANSI/NSF Standard 61, safe for drinking water lines. Conforms to Mil. Spec. Mil-S-45180 D. Grrip: industrial black. Grrip lite: neutral beige.
MSDS #14 and MSDS #13. Spec Sheet-grrip. Spec Sheet-grrip lite.

`

block™ 
All-purpose, tough, pliable seal for joints, valves, flanges, and gaskets - puts joints into service in minutes. An excellent gasket seal - sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. Seals old or worn fittings. Ideal for pumps, tanks and equipment carrying steam, water, oil, gasoline, fuel oil, hydraulic fluids, natural and LP gas (vapor state), anti-freeze, refrigerants except ammonia, lubricants, glycerin, solvents, brine and other gases, liquids and chemicals (see spec sheet for specifics). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Provides leak-proof resistance to high pressure, temperature, expansion, contraction and extreme vibration. Grit-free; non-separating, distinctive non-runny consistency. Can easily be cleaned from tools and hands with isopropyl alcohol or Hercules for Hands towels. Performs over a temperature range of -50º to 450º F (on steel pipe), 12,000 psi (hydraulic), 2600 psi (gas). Conforms to Mil. Spec. Mil-S-45180 D. Blue.
MSDS #72. Spec Sheet.

pro dope^®
This leader in traditional, standard oil-based thread sealants ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0º F to 350º F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray.
Pro Dope meets the standards and is deemed to be FGG/BM/CZ™ System Compatible. FGG/BM/CZ™ System Compatible indicates this product has been tested and is monitored on an on going basis to assure chemical compatibility with FlowGuard Gold®, BlazeMaster®, and Corzan® pipe and fittings. **
MSDS #12. Spec Sheet.

pipe joint compound
Traditional, standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0º F to 350º F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Rust.
MSDS #23. Spec Sheet.

Multipurpose Heavy Tape Dope®
This high-density genuine tape dope is the best tape sealant available, and is specified by many industrial users, utilities, and government agencies. At 3 mil thick, it requires far fewer wraps than cheaper tapes. Easy-to-use - for sealing all types of threaded pipe, valves, fittings, accessories and controls, including those made from steel, galvanized and black iron, brass, copper, aluminum, stainless steel, glass, monel, synthetic rubber, and all plastics. Appropriate for pipes carrying: acids, solvents, alkalis, steam, hot and cold water, LP gas, natural gas, oxygen and almost every chemical. Self-lubricating, with excellent dielectric properties which minimize galvanic action.  Made with genuine Dupont Teflon* fluorocarbon resin.  Will not harden, crack, or crumble. Clean break-off; no shredding. Will not contaminate material in pipes. Protects against any chemical corrosive action, and is not affected by weather. Non-toxic. Performs over a temperature range of -450º to 500º F; 10,000 psi. Meets Mil Spec. MIL-T-27730A. White color for universal use.
MSDS #7. Spec Sheet.